Home / Primers & Undercoats / Paragon Two Pack Etch Primer

Paragon Two Pack Etch Primer

Paragon Two Pack Etch Primer
(0 reviews)  

3.00 kgs
Painting Advice
Technical Datasheet
Material Safety Datasheet
Our price:
including VAT

A fast drying, spray quality two pack pigmented etch primer based on PVB resin and zinc tetroxy chromate.

Provides excellent adhesion to steel, zinc, aluminium, galvanised and nickel plated surfaces and other non ferrous metals. Dries to a translucent yellow matt finish.

Can be over coated with a wide range of top coats but works especially well with our range of Paragon Enamels and is essential when painting onto galvanised or nickel plated surfaces.
Can be applied by brush from the can but best results will be achieved by spray when thinned with up to 20% PT3 thinner. best sprayed with a tip size of 1.4mm to 2.0mm with an atomizing pressure of 40-60 PSI.
Please select the desired tin size from the drop down menus below.
Recommended substrate conditions for metal - Degreased, abraded and finally solvent wiped. The surface must be moisture free and application must not be made in conditions of excessively high humidity (above 75% RH)
Mixing instructions - Ratio of base to activator 1:1 by volume. Do not use mixed product after 12 hours post mixing and do not store mixed primer in steel containers. Pot life once mixed 4-6 hours.

Touch dry:- 15 minutes @ 20ºC.
Thinners:- Paragon Synthetic PT3 Thinner
Over coating:- Minimum interval before overcoating is 1 hour but not more than 24 hours. Must be kept dry between coats and if left more than 24 hours should be lightly abraded before use.
Coverage:- 10-12 Square metres per litre.
Film thickness:- DFT.10-15 microns per application
Temp Resistance:- 200ºC.
Storage:- 12 months in original sealed containers when stored between 10-15ºC.
VOC:- 740 grams per litre.

Supplied as a two tin kit comprising of 1 litre of primer and 1 litre of activator making 2 litres of finished product.

Paragon PT8 Synthetic Thinners
RAL 3002 Carmine Red
RAL 9005 Jet Black
BS381C 538 Cherry
Paragon PT3 Synthetic Thinners
Farecla Clear Measuring Cup 700ml
Paragon Ferro Zinc Rust Converter
Deep Bronze Green BS381C - 224
VHT Paint - Matt Black 400ml Aerosol
There have been no reviews