Home / Workshop Machinery Colours / Fobco Drill Press Turquoise

Fobco Drill Press Turquoise

Fobco Drill Press Turquoise
(1 reviews)  

1.50 kgs
Painting Advice
Technical Datasheet
Material Safety Datasheet
Our price:
including VAT
Click here to subscribe for 'Back-in-stock' notifications

A superior high temperature machinery enamel the correct shade for the Fobco range of drill presses which were painted in the distinctive turquoise colour.

Is used in preference to normal commercially available enamels for decorative work of the highest standard.

Ideal for heavy duty vehicle finishing, tractors, stationary engines, narrow boats, workshop machinery and marine applications as well as for vehicle repair work and sign writing.

  • High build properties.
  • A long wet edge allows for the largest of fabrications to be brushed or sprayed without overspray or brush drag.
  • High solids content.
  • Brush or spray application.
  • Provides ultimate high gloss with good build and scratch filling properties.
  • Very good resistance to oils, fats, and cutting fluids, which makes it an ideal choice for all types of workshop machinery.
  • Excellent water resistance, flexibility and exterior durability.

Touch dry:- 2 Hours. Firm dry:- 6 Hours. Hard dry:- 12 Hours, @ 20ºC.
Thinners:- Fully synthetic PT8.
Over coating:- Within 30 minutes or after 16 hours.
Film thickness:- 100 microns WFT gives approximately 50 microns DFT.
Temp Resistance:- 170ºC.
Storage:- 12 months in original sealed containers.
Further information:- Data Sheet / MSDS

Paragon PT8 Synthetic Thinners
BS381C 110 Roundel Blue - Record Vice Blue
Myford Lathe Grey
Paragon Anti Corrosive Zinc Phosphate Grey Primer
Colad Clear Measuring Cup 650ml
Colad Clear Measuring Cup 1400ml
Jones & Shipman Surface Grinder Blue
Mirlon Scuff Pads
Fobco Drill Press Cream
Average customer rating:
(1 reviews)  

1 Most useful customer reviews (see all reviews):
Malcolm Dickman
Jun 17, 2020
This customer purchased the item at our site.
Excellent quality paint, Lots of choice of colours,I would recommend this product for anyone doing rebuilds or repainting any Machinery. I bought this for a Myford Lathe rebuild . Wouldn't use any other product. First time i have used it Bought a second tin, Different Colour for my lathe stand. 500ml tin goes a long way, as it recommends 3 coats give a nice thick coating. Used a quality long Bristle brush to keep brush marks to a minimum , Need not of worried took my time and brush marks were minimal .

Advantages: Hard wearing excellent for heavy duty Machinery, and workshop, Spoiled for choice when it comes to Colour, Easy to apply, well worth the wait between coats for it to dry. Rubbed down between coats to achieve a great finish. . Superb Finish

Disadvantages: Faultless .
Loading...Was the above review useful to you? Yes (0) / No (0)