Home / Workshop Machinery Colours / Warco Machine Green

Warco Machine Green

Warco Machine Green
 
(0 reviews)  

SKU
Warco6011-0.5L
Weight
1.50 kgs
Painting Advice
Technical Datasheet
Material Safety Datasheet
Our price:
£14.20
including VAT
Size
Finish
Qty
Click here to subscribe for 'Back-in-stock' notifications

A superior high temperature machinery enamel the correct shade for the Boxford range of lathes which were made during October and November of 1981 when the colour scheme was temporarily changed to the Reseda Green shade.

Is used in preference to normal commercially available enamels for decorative work of the highest standard.

Ideal for heavy duty vehicle finishing, tractors, stationary engines, narrow boats, workshop machinery and marine applications as well as for vehicle repair work and sign writing.

  • High build properties.
  • A long wet edge allows for the largest of fabrications to be brushed or sprayed without overspray or brush drag.
  • High solids content.
  • Brush or spray application.
  • Provides ultimate high gloss with good build and scratch filling properties.
  • Very good resistance to oils, fats, and cutting fluids, which makes it an ideal choice for all types of workshop machinery.
  • Excellent water resistance, flexibility and exterior durability.

Touch dry:- 2 Hours. Firm dry:- 6 Hours. Hard dry:- 12 Hours, @ 20ºC.
Thinners:- Fully synthetic PT8.
Over coating:- Within 30 minutes or after 16 hours.
Film thickness:- 100 microns WFT gives approximately 50 microns DFT.
Temp Resistance:- 170ºC.
Storage:- 12 months in original sealed containers.
Further information:- Data Sheet / MSDS

Paragon PT8 Synthetic Thinners
£6.20
RAL 1023 Traffic Yellow
£14.20
Harrison Lathe Beige
£14.20
Harrison Lathe Green - Dark Drab
£14.20
A2 Poster Colour Chart
£6.00
Mirlon Scuff Pads
£1.46
Paragon Hammered Finish - Mid Blue
£9.60
Warco Machine Yellow
£14.20
Fast Mover Tack Cloths
£5.11
There have been no reviews