Home / Primers & Undercoats / Paragon Tinted High Build Undercoat

Paragon Tinted High Build Undercoat

Paragon Tinted High Build Undercoat
 
(6 reviews)  

SKU
UC7104-0.5L
Weight
1.50 kgs
Painting Advice
Our price:
£16.39
including VAT
Size
Colour
Qty
Click here to subscribe for 'Back-in-stock' notifications

Paragon tinted high build undercoat has been specially formulated for use under Paragon enamel top coats and is available in a range of ten standard colours which are complimentery to the vast majority of top coat colours.

Special bespoke tints can be created if a suitable colour from the standard range cannot be found.

Apply the one to two coats to achieve a uniform finish. Allow to fully dry before over coating with top coat. Can be lightly rubbed down between coats to improve the final finish. With ferrous metals loose scale and rust should be removed and a preparatory coat of Paragon Primer applied. For non ferrous metals a preparatory coat of Paragon etch primer should be applied.

  • High build properties.
  • Excellent brush-ability.
  • Brush or spray application.
  • Provides a strong key with good build and scratch filling properties.

Touch dry:- 3 hours, Firm dry:- 16 hours @ 20ºC.
Thinners:- Paragon PT8
Application:- Thin first coat with up to 10% Paragon PT8 if required.
Over coating:-  Primers once touch dry can normally be re-coated at any time. There are however a number of factors, such as film thickness, air temperature, air movement etc that can substantially alter the through dry time so we recommend doing a small test patch before over coating a large area.
Coverage 14 square metres per litre average.
Colour:- Tinted to a range of ten standard colours, bespoke colours upon request.
Storage:- 12 months in original sealed containers.

Paragon PT8 Synthetic Thinners
£7.16
Myford Lathe Grey
£16.50
Paragon Anti Corrosive Zinc Phosphate Grey Primer
£10.40
Paragon Single Pack Etch Primer Grey
£11.03
Colad Clear Measuring Cup 700ml
£0.47
A2 Poster Colour Chart
£8.39
Paragon Brush Cleaner
£3.86
Waterproof Abrasive Paper
£1.13
Promatic Aerosol Etch Primer 500ml
£11.64
Average customer rating:
 
(6 reviews)  



5 Most useful customer reviews (see all reviews):
Wayne Carr
Mar 3, 2024
This customer purchased the item at our site.
Good coverage

Advantages: Good coverage good for brushing not tried to spray yet
Loading...Was the above review useful to you? Yes (0) / No (0)
Graham Winfield
Aug 1, 2023
This customer purchased the item at our site.
A very good product and prompt delivery
Loading...Was the above review useful to you? Yes (0) / No (0)
Geoffrey Anderson
Mar 27, 2023
This customer purchased the item at our site.
Paragon Tinted High Build Undercoat provides a perfect base prior to applying the enamel gloss. It's 'filling' properties are excellent and it dries quickly.

Advantages: Excellent filling properties, when rubbed down it provides a perfect surface for applying the gloss.

Disadvantages: Requires skill to apply evenly. (Not a disadvantage but from experience, a factor)
Loading...Was the above review useful to you? Yes (0) / No (0)
peter cherry
Jul 28, 2020
This customer purchased the item at our site.
Quick and easy to apply, seals outer coat rapidly so for out door use it is very good. I will need to wait till after winter to fully test but initial inspections look good

Advantages: Seals within 20 minutes, can rub down and then top coat

Disadvantages: None
Loading...Was the above review useful to you? Yes (0) / No (0)
Alan Martin
Jul 14, 2020
This customer purchased the item at our site.
Very pleased with the service and quality off the paint.

Advantages: Can order the paint from your armchair.

Disadvantages: None
Loading...Was the above review useful to you? Yes (0) / No (0)