Paragon Ferro Zinc Rust Converter

Paragon Ferro Zinc rust converter is a high performance water based treatment for neutralising surface rust prior to the application of primer.

Ferro Zinc rust converter is is an easily applied single pack material with excellent long term conversion properties. In many situations blast cleaning is not cost effective or practical, and though Ferro Zinc rust converter is not an equivalent alternative to shot blasting, it does offer a far superior performance than conventional coatings applied to slightly rusted surfaces.

Ferro Zinc rust converter is used after simple wire brushing to remove surface rust. A dramatic colour change from white to black will show that the rust has been effectively neutralised. Ferro Zinc rust converter should then be over coated with a suitable Paragon primer & topcoat system for prolonged corrosion resistance.

Surfaces should be wire brushed to remove loose rust. Soluble salts should be removed by washing with water, as they may slow down the conversion process. Paragon Ferro Zinc rust converter should not be used over oil/grease contamination, or existing paint as this will render the product ineffective.

Coverage:- 20 Square metres per Litre
Number of coats:- One thin coat
Touch dry:- 20-30 minutes, Full dry:- 1 Hour @ 20ºC.
Recoatable:- after 2-3 hours
WFT:- 30 Microns
DFT:- 20 Microns