Home / Workshop Machinery Colours / Emco Milling Machine Yellow

Emco Milling Machine Yellow

Emco Milling Machine Yellow
 
(2 reviews)  

SKU
EmcoYellow1007-0.5L
Weight
1.50 kgs
Painting Advice
Technical Datasheet
Material Safety Datasheet
Our price:
£15.00
including VAT
Size
Finish
Qty
Click here to subscribe for 'Back-in-stock' notifications

A traditional ultra high quality synthetic coach and machinery enamel. 

Is used in preference to normal commercially available enamels for decorative work of the highest standard.

Ideal for heavy duty vehicle finishing, tractors, stationary engines, narrow boats, workshop machinery and marine applications as well as for vehicle repair work and sign writing.

  • High build properties.
  • A long wet edge allows for the largest of fabrications to be brushed or sprayed without overspray or brush drag.
  • High solids content.
  • Brush or spray application.
  • Provides ultimate high gloss with good build and scratch filling properties.
  • Very good resistance to oils, fats, and cutting fluids, which makes it an ideal choice for all types of workshop machinery.
  • Excellent water resistance, flexibility and exterior durability.

Touch dry:- 2 Hours. Firm dry:- 6 Hours. Hard dry:- 12 Hours, @ 20ºC.
Thinners:- Fully synthetic PT8.
Over coating:- Within 30 minutes or after 16 hours.
Film thickness:- 100 microns WFT gives approximately 50 microns DFT.
Temp Resistance:- 170ºC.
Storage:- 12 months in original sealed containers.

Paragon PT8 Synthetic Thinners
£6.52
Colchester Lathe Dove Grey
£15.00
Colchester Lathe Raven
£15.00
Paragon Anti Corrosive Zinc Phosphate Grey Primer
£9.46
Paragon Anti Corrosive Red Oxide Primer
£9.46
Paragon Single Pack Etch Primer Grey
£10.02
Paragon Hammered Finish - Mid Grey
£10.08
Rodo Prodec Tradesman 1 Inch Paint Brush
£1.06
Emco Milling Machine Green
£15.00
Average customer rating:
 
(2 reviews)  



2 Most useful customer reviews (see all reviews):
Michael Partington
Jan 31, 2021
This customer purchased the item at our site.
This paint is excellent quality and the colour match is spot on.

Advantages: I used the aerosol and the finish was equal to the original paintwork on my Emco lathe. I doubt brushing would achieve the same result.

Disadvantages: None.
Loading...Was the above review useful to you? Yes (0) / No (0)
William Neath
Aug 14, 2020
This customer purchased the item at our site.
Excellant paint, have used before on an engine block, still looks good after several years
Loading...Was the above review useful to you? Yes (0) / No (0)