Racing Red High Temperature Brake Caliper Paint 0.5L

Specially formulated Paragon high temperature enamel for brake caliper painting.

Supplied as standard in full gloss finish, 500ml tins. Other finishes and tin sizes are available by request.

This paint is temperature resistant to 170°C and should ideally be applied to ferrous calipers without a primer, just make sure the surface is clean of all oil, grease or dust residue and rust free or for non ferrous calipers (alloys etc) pre prime with Paragon Etch Primer for non ferrous metals.

Two coats should be applied by brush straight from the can or by spray application when thinned 10-12% with Paragon PT8 synthetic thinners.