Nuffield Tractor Orange

Nuffield Tractor Orange
(1 reviews)  

1.50 kgs
Painting Advice
Technical Datasheet
Material Safety Datasheet
Our price:
including VAT
Click here to subscribe for 'Back-in-stock' notifications

A traditional ultra high quality synthetic coach and machinery enamel the correct shade of orange for Nuffield tractors. 

Is used in preference to normal commercially available enamels for decorative work of the highest standard.

Ideal for heavy duty vehicle finishing, tractors, stationary engines, narrow boats, workshop machinery and marine applications as well as for vehicle repair work and sign writing.

  • High build properties.
  • A long wet edge allows for the largest of fabrications to be brushed or sprayed without overspray or brush drag.
  • High solids content.
  • Brush or spray application.
  • Provides ultimate high gloss with good build and scratch filling properties.
  • Very good resistance to oils, fats, and cutting fluids, which makes it an ideal choice for all types of workshop machinery.
  • Excellent water resistance, flexibility and exterior durability.

Touch dry:- 2 Hours. Firm dry:- 6 Hours. Hard dry:- 12 Hours, @ 20ºC.
Thinners:- Fully synthetic PT8.
Over coating:- Within 30 minutes or after 16 hours.
Film thickness:- 100 microns WFT gives approximately 50 microns DFT.
Temp Resistance:- 170ºC.
Storage:- 12 months in original sealed containers.

Paragon PT8 Synthetic Thinners
BS381C 110 Roundel Blue - Record Vice Blue
Ferguson Tractor Grey
Paragon Anti Corrosive Zinc Phosphate Grey Primer
Colad Clear Measuring Cup 650ml
Nuffield Tractor Old English White (cream)
Paragon Hammered Finish - Light Blue
Paragon Hammered Finish - Startrite Green
Average customer rating:
(1 reviews)  

1 Most useful customer reviews (see all reviews):
Barry Atkinson
Mar 5, 2022
This customer purchased the item at our site.
Beautiful brush apply and finish gloss, used on 1971 Victa 160 Pro lawn mower (perfect) and gonna use to refurb my 1985 Belle 150 electric concrete mixer. (both same orange tone).

Advantages: Have used Paragon paint enamels on many of my machine refurbishments lathes, drills, mills etc two coats perfect. Brush applied, see brush marks then left alone to dry, flat gloss finish no marks perfect.

Disadvantages: Can't see any, have used in all kinds of environments, warm, cold, damp and steamy same exceptional result.
Loading...Was the above review useful to you? Yes (0) / No (0)